Maverick 10' 18 Gauge Box and Pan Brake/Shear Combo
SKU:
HSBC-1018
$28,995.00
$25,950.00
$25,950.00
per item
The Maverick 10' Brake/Shear Combo. The Maverick combines two essential needs amongst all sheet metal fabrication shops. The ability to bend and cut metal. Its 2-1 compact construction makes operation transitions effortless. Hydraulically powered by a 3hp 220V single phase motor is convenient for locations where 3 phase power is not accessible. Includes a mobile control panel allowing operators to work independently from a safe distance.
Model |
HSBC-1018 |
Bending Capacity |
18 Ga. Mild Steel 22 Ga. Stainless Steel 14 Ga. Aluminum |
Shearing Capacity |
20 Ga. Mild Steel 24 Ga. Stainless Steel 16 Ga. Aluminum |
Bending/Shearing Length |
122" |
Max Box Depth |
2 1/4" |
Bend Degree |
0-135 |
Reverse Bend |
5/8" |
Beam Adjustment |
1" |
Beam Opening |
6.1" |
Jog Cycle Control |
Yes |
Back Gauge |
Brake: 3"-20" ( Hand Wheel w/ inch/mm dual scale ) Shear: 0-20" ( Slide Stop Bar w/ inch/mm dual scale ) |
Finger Assortment |
2" (3), 3" (4) 4" (11) 6" (10) Total 10' 2" |
Emergency Stop |
Yes |
Main Motor Hydraulic Oil |
3HP, 220V, 1PH Shell#68HD |
Blade Gap Adjustment |
Yes |
Shipping Demensions |
155" x 45" x 71" |
Shipping Weight |
3230 lbs |
Shear Features:
- Features hardened steel blades. "Longevity "
- Blade Gap Adjustment for shearing different material thicknesses. " Shimless"
- Optional shear back gauge "set with an easy to read scale from 0" to 20".
- Material support table.
- Support Drop " deflects cut offs away from the machine. "
- Spring Hold Down " Secures material in place when cutting. "
- Mobile Control Panel w/ Emergency Stop " Can be moved to either side of the machine."
- Electronic Bend Stop w/ Degree Dial Calibration "For repetitive bends."
- Robust Tie Rods
- Removable Finger "for bending box and pans 2 1/4" Box Depth." 2"-3pcs, 3"-4pcs, 4"-11pcs, 6"-10pcs
- Optional 3" to 20" Handwheel operated back gauge with inch/mm dual scale
- Adjustable upper jaw to permit for different material thicknesses up to 18 Gauge Mild Steel.
- Hydraulic Beam Clamping and Bending.
- Auto and Jog mode controls.
- Mobile Control Panel w/ Emergency Stop " Can be moved to either side of the machine."
- Removable Apron for 5/8" reverse bends.
- 6.1" upper beam opening.
- Optional shear back gauge "set with an easy to read scale from 0" to 20". ( Included )
- Optional 3" to 20" Handwheel operated back gauge with inch/mm dual scale ( Included )
- Optional 122" Solid Straight Finger
- Optional Additional Fingers
