Model |
TN-250 |
Country of Manufacture |
United States |
Notching Capacity (OD) |
1/2" - 2 1/2" |
Angle Adjustment |
0 – 220° |
Power |
1/2" (12.7 mm) Hand Drill |
Shipping Weight |
50 lbs. |
Shipping Dimensions |
24" x 12" x 12" |
- Notches up to 2.5” OD.
- It’s the only hole saw tubing notcher on the market that’s always centered, left to right and up and down—no matter what size tube or pipe you have.
- Fully-adjustable axis accommodates almost any notch combination.
- Carriage pivots up to 220° left to right, so you can come from the “back side” of the notch.
- 2 slotted mounting rails move up and down with scales for offset notches up to 1” and allow for almost any position of the bearing block.
- Large engraved degree dial (or angle-finder) helps you get those back-side notches lined up.
- 1.25” Thompson® shaft rides in sealed and oiled needle bearings for smooth performance.
- Both ends of the shaft are completely replaceable to save you time and money.
- Heavy-duty .75” steel plate backbone and all-interlocking components create a rigid platform that reduces vibration and prolongs the life of the hole saws.
- All slots include caps to last longer.
