HYDRAULIC PRESS BRAKE BP-14010 CNC
SKU:
BP-14010 CNC
$55,995.00
$47,880.00
$47,880.00
per item
Has your shop out grown it's current crop of sheet metal brakes and need a large press brake to do major jobs around the shop?  If so then the BP-140CNC press brake might just be the right machine for you.  Available in both 10 and 13 foot lengths, this 220 volt three phase powered machine puts out a whopping 140 tons of bending force through its industrial grade Vickers/Eaton® hydraulic system.
Model |
BP-14010 CNC |
Table Size (Length) |
125/157" |
Back Gauge Length |
23.62" |
Return Speed |
2.36" / sec. |
Maximum Pressure |
140 tons |
Throat Depth |
12.5" |
Stroke Distance |
4.7" |
Approach Speed |
2.0" / sec. |
Back Gauge Motor |
1/2 hp |
Bending Speed |
.6" / sec. |
Main Motor |
10 hp |
Distance Between Housings |
102/124" |
Distance From Table To Ram |
15.3" |
Power |
220V / 3-phase |
Shipping Weight |
10ft = 16,000 lbs. 13ft = 19,000 lbs. |
Shipping Dimensions |
10ft = 134" x 52" x 95" 13ft = 165" x 52" x 97" |
But use of top quality components don’t stop there, the BP-140CNC uses hydraulic seals from NOK® in Japan. The main electrical is supplied by Wiedmueller and Schneider® from Germany. A controller handles the programming of the bend depth and the back stop position. The programmable controller can hold up to 40 programs with 25 bends per program and has an accuracy of .01mm all of which make programming a breeze.
The BP-140CNC press brake comes standard with a multi vee bottom die and gooseneck punch that is attached to the upper ram with quick change punch holders. This setup is the best for doing multiple applications without having a major tooling switch.
The BP-140CNC press brake comes standard with a multi vee bottom die and gooseneck punch that is attached to the upper ram with quick change punch holders. This setup is the best for doing multiple applications without having a major tooling switch.
Coming Soon!
