Baileigh Numerically Controlled Mandrel Bender MB-NCH-1 Series
SKU:
MB-NCH-1
$0.00
per item
​The first in our range of hydraulic mandrel benders has the capacity to bend up to 104mm pipe, operated with an NC controller. It allows you to store up to 25 programs, each with 10 sequential bends. All hydraulic movements are independent of each other. The pressure die assist speed is adjustable to follow the clamp die at the right speed. The clamp die base locks into the former die base to ensure there is no change in speed between the clamp and former, with the bend speed being adjustable too. This outwardly simple machine ensures you have the adjustability, strength, reliability, and accuracy needed to make high-quality bends on a regular basis.
Capacities |
MB-35NCH-1 |
MB-42NCH-1 |
MB-60NCH-1 |
MB-80NCH-1 |
MB-100NCH-1 |
Max Tube O.D (MS) |
35 x 2 mm |
42 x 2mm |
60 x 3mm |
80 x 3.5mm |
104 x 4mm |
Max Tube O.D (SS) |
28 x 2mm |
38 x 1.5mm |
51 x 2mm |
76 x 1.5mm |
100 x 1.5mm |
Max Square Tube (ms) |
25 x 25 x 2mm |
35 x 35 x 2mm |
50 x 50 x 3mm |
60 x 60 x 4mm |
80 x 80 x 5mm |
Maximum Center Line Radius |
145mm |
150mm |
260mm |
280mm |
360mm |
Maximum useful Length |
2500mm |
2500mm |
3000mm |
3500mm |
4000mm |
Total Power (HP) |
4 kw |
4 kw |
15 kw |
15 kw |
30 kw |
Weight |
2500kgs |
3200kgs |
3800kgs |
4000kgs |
7000kgs |
Dimensions |
3300 x 800 x 1150mm |
3600 x 1150 x 1250mm |
4100 x 1150 x 1250mm |
4600 x1350 x 1400mm |
5600 x 1800 x 1600mm |
Power Requirements |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
- 1 axis Numerically Controlled bend degree (Y)
- emory can store up to 25 programs with 10 bends (Y)
- 3rd axis Sequential adjustable roller stop system - (X)
- Completely hydraulic design allowing for optimal accuracy and performance
- Industry leading clamping design via high quality Direct Acting Cylinders (DAC)
- Up to 10 programmable bending speeds and pressure die assist speeds for maximum control
- Fully hydraulic clamping with standard pressure die assist AND Mandrel Extraction
- Can be operated in both Manual and Automatic modes
- Numerical control alarm monitoring for quick and easy troubleshooting
- Available in capacities up to 13” O.D Round tube
OPTIONAL
- Automatic Tool Retraction
- Automatic Mandrel Lubrication
- Additional Useful Bed Length (3ft Increments)
- Split die system for square and special profiles
- Increased program storage available upon request
