Baileigh Mandrel Benders MB-NCE-2 Series
SKU:
MB-NCE-2 SERIES
$0.00
per item
Our top of the range electromechanical mandrel bender, designed for multi-plain higher volume bending.
The NCE-2 has 3-axis controls, 2 are NC and 1 is manual. Like the NCE-1 the machine comes as standard with a 25 program x 10 bend memory, but unlike the NCE-1 the NCE-2 allows you to program the plane-of-bend for each bend angle as well. When the machine is running and the start button is pressed, the plane-of-bend carriage rotates the tube to the right plane before the bending starts, this happens between all bend angles.
Capacities |
MB-35NCE-2 |
MB-60NCE-2 |
MB-90NCE-2 |
Max Tube O.D (Mild Steel) |
35 x 3mm |
60 x 3mm |
90 x 4mm |
Max Tube O.D (SS) |
30 x 2mm |
51 x 2mm |
76 x 2mm |
Max Square Tube (Mild Steel) |
30 x 30 x 2mm |
51 x 51 x 3mm |
76 x 76 x 2mm |
Max Bend Angle |
190⁰ |
190⁰ |
190⁰ |
Maximum Center Line Radius |
110mm |
195mm |
305mm |
Maximum Useful Length |
3000mm |
3000mm |
3000mm |
Bending Direction |
Clockwise |
Clockwise |
Clockwise |
Motor |
5.6 Kw |
8.1 Kw |
8.12 Kw |
Dimensions |
4700 x 1000 x 1320mm |
4950 x 1200 x 1330mm |
5560 x 1550 x 1330mm |
Weight |
1150 kgs |
1760 kgs |
2427 kgs |
Power Requirements |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
400V, 50Hz, 3 Phase |
OPTIONAL
- 1-axis NC control
- Memory can store 25 programs x 10 bends - (Y)
- Sequential flip stop axis control
- Fully hydraulic clamping
- Hydraulic mandrel extractor
- Hydraulic pressure die
- Hydraulic pressure die assist
- Available in 35, 60, and 90mm capacities
OPTIONAL
- Split die system
- Automatic mandrel lubrication
- Additional useful bed length (1 metre increments)
