Van Mark Metal Master 20 Contractor Brake, 10' Capacity
SKU:
MM1060
$2,275.00
$1,935.00
$1,935.00
per item
The Van Mark Metal Master 20 features a 20" throat depth, largest available on a aluminum bending brake. The unit is capable of complex bends up to 180 degrees. Engineered to perform a 5/8" bend for tighter J-Channel pockets. The brake is manufactured and assembled in the USA.
PLEASE NOTE: SHOWN WITH OPTIONAL STAND.
PLEASE NOTE: SHOWN WITH OPTIONAL STAND.
Model |
Length |
Castings |
Weight |
MM200 |
2'0" (0.6 m) |
2 ea. |
52 lbs (23.6 kg) |
MM450 |
4'6" (1.4 m) |
2 ea. |
78 lbs (35.5 kg) |
MM650 |
6'6" (2.0 m) |
3 ea. |
107 lbs (48.6 kg) |
MM850 |
8'6" (2.6 m) |
3 ea. |
122 lbs (55.5 kg) |
MM1050 |
10'6" (3.2 m) |
4 ea. |
148 lbs (67.3 kg) |
MM1250 |
12'6" (3.8 m) |
4 ea. |
194 lbs (88.2 kg) |
Material |
Maximum Thickness |
Aluminum (3003H14) |
.032" |
Galvanized Steel |
26 ga. |
Painted Steel (Grade D) |
26 ga. |
Roofing Copper |
24 oz. |
Zinc |
.032" |
Stainless Steel (304L) |
26 ga. |
The Metal Master® 20 was originally designed for the metal roofing industry and this why we engineered the largest throat depth portable bending brake available. The success and popularity of our metal roofing Metal Master® 20 has created demand from residential siding and roofing contractors to develop a lighter version with a 20" Throat Depth, so we did. The Metal Master® 20 Contractor version offers same great capabilities and functionality as the Mark Series, but now with a deeper throat. Versatile in its ability to perform various complex bending profiles with ease. Go from bending simple flashing to intricate outside corner posts without making any adjustments to the bending brake. The POWERslot™ Hinge “auto-measures” to a 5 ⁄ 8" bend to make tight pockets for vinyl siding and fiber cement boards. The durable Cam-Locking has proven year after year to be reliable without constant adjustments.
- POWERlock™ provides a strong clamping without need for adjusting when changing material.
- POWERslot™ hinge "auto-measures" 5 ⁄ 8" hem with ease.
- Increased bending radius simplifies hemming & over-bending resulting in faster, easier operations.
- Available in lengths of 2’0", 4’6", 6’6", 8’6", 10’6", and 12’6"
Van Mark Products Corporation warrants this product against defects in material or workmanship for or a period of 1-year from the date of original purchase.
TrimFormer™
$445.00
The Van Mark TrimFormer™ comes standard with Rib Forming and Brick Mold dies. The tool attaches to the bending brake assure accurate profiles for the full length. There is a 4-Point Track System to keep tool on course reduce slip-offs.
Trim Cutter™
$415.00
The Van Mark Trim Cutter™ features all Case Harden Tool Steel Knives for long life and precision cuts. The Trim Cutter™ has a 4-Point Track System that assists with accurate cuts. This unit eliminates rough edges and wear from a utility knife.
Quickscore™
$235.00
The QuickScore™ is engineered to provide straight, easy scoring through the whole length. QuickScore™ even measures the distance for “snap off point”; ¾" for Mark I Series™ and 5 ⁄ 8" for Mark II TrimMaster® and Metal Master 20®.
Coil Dispenser™
$465.00
The Coil Dispenser™ Protects trim coil and keeps it rolled tight while still allowing the material to be dispensed. The unit quickly sets up on the job site where you need it. With the Coil Dispencer you no longer need to get frustrated with unraveling of trim coil. The unit works with TrimCutter™ to allow material to be cut to length.
PLEASE NOTE: STAND IS NOT INCLUDED WITH THE UNIT.
PLEASE NOTE: STAND IS NOT INCLUDED WITH THE UNIT.
Unistand™ EZ Go -Metal Master® 20
$545.00
The Steel frame rolling stand to easily transport bending brake or saw table on the jobsite with Zero Turn capability. The center wheel design makes it easier to navigate and maneuver brake around a job site and is adjustable in height. The simple 4-piece breakdown allows for easy transport.
Unistand™ EZ Go - TrimMaster®
$415.00
The Steel frame rolling stand to easily transport bending brake or saw table on the jobsite with Zero Turn capability. The center wheel design makes it easier to navigate and maneuver brake around a job site and is adjustable in height. The simple 4-piece breakdown allows for easy transport.
Multi Gauge™
$64.95
The Multi Gauge™ measures angles and distance for TrimCutter™ cut-off point. This must have protractors are easy to read and show your bend angles. They automatically slide up and down when making full over-bends and quickly measure distance.
