Baileigh Dual Mitering Band Saw - BS-20M-DM
SKU:
BS-20M-DM
$15,860.00
$15,860.00
per item
Do you need to replace your current band saw because your shop has outgrown it or just looking for a new one to increase production? Then look at the BS-20M-DM dual mitering bandsaw from Baileigh Industrial. The BS-20M-DM has evolved from the original BS-20M to what you see here, an easy-to-use dual mitering band saw. The BS-20M-DM is a dual mitering saw with capabilities to miter 45° left and 60° right with just a flick of the wrist and a push or pull of the head. The BS-20M-DM band saw also incorporates a heavy-duty in-feed table and out-feed table to help save strain on the operation sawing.
Model |
BS-20M-DM |
Return |
Manual |
Miter Adjustment |
Dual Miter Swivel Head |
Miter Angle |
0 – 60°, 45°L |
Motor |
3 hp |
Capacity Round 90°/ 45° / 60° |
13" x 12" x 8.5" |
Capacity Square 90°/ 45° / 60° |
13" x 12" x 8.5" |
Table Height |
30.5" |
Blade Guide |
Carbide / Roller |
Blade Speed (fpm) |
60 - 306 Inverter Driven |
Descent Control |
Hydraulic |
Drive |
Inverter Direct |
Power |
220V, 60Hz, 3-Phase |
Shipping Weight |
2,156 lbs. |
Shipping Dimensions |
88.6" x 35.5" x 61.4" |
Need to increase production? The manual BS-20M-DM offers hydraulic descent, a roller infeed, and a material stop for efficiency. With its steel frame, the saw will last for many years.
- Inverter drive lets you adjust blade speed: 69 to 306 fpm.
- Accepts large 1.25” blade (included) for speed and accuracy. The larger the blade, the straighter the cut.
- Available in 220-volt triple-phase or 440-volt triple-phase (special order) models.
- Industrial reduction gearbox transmission makes the saw more reliable than one with a belt and pulley system.
- Miters 45° left and 60° right. Just push or pull the head to the angle you need.
- Rigid cast iron bow adds to the structural strength of the machine and reduces vibrations.
- Quick-lock vise has serrated jaws that grip onto round material, preventing it from spinning and ruining a blade.
- Hydraulic descent allows you to select the proper speed, increasing cut quality and blade life.
- Roller infeed and outfeed table enables you to slide the material to and from the blade, saving strain.
- Includes a material stop for conveniently making repeat cuts.
- Digital readout shows the blade speed. Adjust the dial to use the same settings for multiples of a part.
- Electro-welded steel frame keeps vibrations down to a minimum, so your cuts stay straight and accurate.
- Our patented blade tensioning gauge simplifies the process of checking the tension and adjusting it. Just line the black arrow up with the green area.
- High-pressure flood coolant system washes away chips and helps the blade last longer.
- Huge chip tray at the bottom collects debris and keeps your shop clean.
- Automatic shut-off system stops the machine once it’s done cutting, for your safety.
- We typically keep this saw and its parts in stock for fast deliveries.
- Covered by a 1-year parts warranty.
- This horizontal band saw comes with lifetime technical support by phone. Call up our team of experienced reps for troubleshooting or project advice.
