Baileigh Hydraulic Shear 5' 10 Gauge SH-6010
SKU:
SH-6010
$14,695.00
$13,965.00
$13,965.00
per item
The SH-6010 hydraulic shear is the perfect machine for any fabrication or sheet metal shop. It features a 60" wide cutting capacity and is capable of smoothly shearing through 10 gauge mild steel and 13 gauge stainless steel. These capacities will accommodate most sheet metal applications.
Model |
SH-6010 |
Back Gauge Length |
24" |
Shear Length |
60" |
Motor |
5 hp |
Thickness (SS) |
10 ga. (13 ga.) |
Strokes Per Minute |
26 |
Front Gauge Length |
24" |
Blade Angle |
1° |
Power |
220V / 3-phase |
Shipping Weight |
3,500 lbs. |
Minimum Material Thickness |
24ga |
Shipping Dimensions |
84" x 36" x 56" |
Using powerful industrial grade hydraulics and a fully welded metal plate construction, this machine is built to reduce flex when shearing at full capacity and result in smooth effortless cuts. The smooth movements help extend blade life. The upper and lower blades have multiple shearing edges, both will help extend blade life and save you money.
The operator has the controls to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. Hold downs clamp the material to the in feed table so the material doesn't lift when being sheared. An adjustable back gauge for repeatability as well as front material supports is also included.
The operator has the controls to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. Hold downs clamp the material to the in feed table so the material doesn't lift when being sheared. An adjustable back gauge for repeatability as well as front material supports is also included.
Manual ( Click Here )
Coming Soon!
