- Machinery
- >
- Drills, Mills & Lathes
- >
- Drill Presses
- >
- Baileigh Variable Speed Drill Press DP-1500VS
Baileigh Variable Speed Drill Press DP-1500VS
SKU:
DP-1500VS
$4,795.00
$4,555.00
$4,555.00
Unavailable
per item
Drill smarter and harder with this 20” floor-type drill press which tackles hefty capacities at up to 2000 rpm. Built to deliver precise results for years, the DP-1500VS comes equipped with a variety of time-saving and performance-enhancing features.
-
Specifications
-
Features
-
Manual
-
Video
<
>
Model |
DP-1500VS |
Country of Manufacture |
Taiwan |
Table Size |
22" x 18.5" |
Quill Diameter |
2.95" |
Quill Feed |
.0078", .004", .002" per rev. |
Spindle Nose to Table |
22.75" |
Spindle Nose to Base |
40.75" |
Spindle Speed High |
245 - 2000 U / 1 min |
Spindle Speed Low |
65 - 540 rpm |
Spindle Taper |
MT 4 |
Table Slot |
.625" |
Tapping Capacity |
.937" |
Main Motor |
2 hp |
Drill Capacity Cast Iron |
1.75" |
Drill Capacity Steel |
1.5" |
Power |
220V Single Phase |
Shipping Weight |
902 lbs. |
Spindle Travel |
5.9" |
Column Diameter |
4.52" |
Base Dimensions L x W |
27" x 19" |
Shipping Dimensions |
40" x 25" x 83" |
- 2 hp motor runs on 220-volt single-phase power and will work practically anywhere.
- Handles a maximum drilling capacity of 1.5” steel and 1.75” cast iron.
- Auto-reversing tapping feature has a capacity of .937”.
- Speed range from 65 to 2000 rpm lets you pick the right setting for your project.
- Potentiometer dial controls the drill speed.
- Digital readout on the front displays the speed in rpm for easy checking.
- Sophisticated Delta® inverter drives #4 Morse taper spindle.
- Chuck with automatic tool ejector simplifies tooling changes.
- Large, machined 22” x 18.5” drill table offers plenty of room for material.
- Oversized .625” T-slots allow for secure clamping of a vise or fixture.
- Sturdy 4.52” column eliminates flex and boosts drilling accuracy.
- Cast base supports rigidity at maximum capacity.
- Power-down feed helps to prolong the machine’s lifetime of use.
- Safety guard around the spindle with a limit switch protects you and your shop.
- Powerful coolant system, housed in the base, keeps the drill from overheating and helps the drill last longer.
- Includes a bright halogen light that bends to enable you to see the material better as you work.
Manual ( Click Here )